Last 100 publications (at date 18-10-2022)  Follow the link for updates: https://hal.archives-ouvertes.fr/3S-R/

• [Ortega Laborin, Roubin, Malecot, et. al.] An analysis of embedded weak discontinuity approaches for the finite element modelling of heterogeneous materials Computers & Structures 2022 10.1016/j.compstruc.2022.106894
• [Ortega, Roubin, Malecot, et. al.] A mixed-mode E-FEM approach for the study of local fracture processes in heterogeneous quasi-brittle materials Materials And Structures 2022 10.1617/s11527-022-02055-y
• [Orgéas, Gupta, Martoïa, et. al.] Ice-templating hydrogels with high concentrations of cellulose nanofibers to produce architected cellular materials for structural applications Materials & Design 2022 10.1016/j.matdes.2022.111201
• [Touron, Celle, Orgéas, et. al.] Hybrid Silver Nanowire–CMC Aerogels: From 1D Nanomaterials to 3D Electrically Conductive and Mechanically Resistant Lightweight Architectures Acs Nano 2022 10.1021/acsnano.2c04288
• [Fang, Granger, Ludwig, et. al.] 3D grain mapping by laboratory X-ray diffraction contrast tomography implemented on a conventional tomography setup Iop Conference Series: Materials Science And Engineering 2022 10.1088/1757-899X/1249/1/012039
• [Jouan, Kotronis, Caillerie, et. al.] A second gradient cohesive element for mode I crack propagation Finite Elements In Analysis And Design 2022 10.1016/j.finel.2022.103732
• [Törnquist, Le Cann, Tengattini, et. al.] The Hydration State of Bone Tissue Affects Contrast in Neutron Tomographic Images Frontiers In Bioengineering And Biotechnology 2022 10.3389/fbioe.2022.911866
• [Liu, Wautier, Nicot, et. al.] How meso shear chains bridge multiscale shear behaviors in granular materials: a preliminary study International Journal Of Solids And Structures 2022 10.1016/j.ijsolstr.2022.111835
• [Badika, El Merabi, Capdevielle, et. al.] Influence of Concrete–Rock Bonds and Roughness on the Shear Behavior of Concrete–Rock Interfaces under Low Normal Loading, Experimental and Numerical Analysis Applied Sciences 2022 10.3390/app12115643
• [Terzolo, Bailly, Orgéas, et. al.] A micro-mechanical model for the fibrous tissues of vocal folds Journal Of The Mechanical Behavior Of Biomedical Materials 2022 10.1016/j.jmbbm.2022.105118
• [Yadav, Sieffert, Vieux-Champagne, et. al.] Optimization of the Use Time of a Shake Table with Specimen Preparation outside the Table Surface Buildings 2022 10.3390/buildings12030319
• [Ferré-Sentis, Dumont, Orgéas, et. al.] Rheological response of compressible SMCs under various deformation kinematics: Experimental aspects and simple modelling approach Composites Part A: Applied Science And Manufacturing 2022 10.1016/j.compositesa.2021.106774
• [Sun, Roubin, Colliat, et. al.] Damage and Fracture in Brittle Materials with Enriched Finite Element Method: Numerical Study Handbook Of Damage Mechanics 2022
• [Forquin, Abdul‐Rahman, Saletti] A novel experimental method to characterise the shear strength of concrete based on pre‐stressed samples Strain 2022 10.1111/str.12407
• [Lerbet, Challamel, Nicot, et. al.] Divergence instability of kinematically constrained Hencky chains: Analytic results and asymptotic behavior Journal Of Applied Mathematics And Mechanics / Zeitschrift Für Angewandte Mathematik Und Mechanik 2022 10.1002/zamm.202100157
• [Lejouad, Richard, Mongabure, et. al.] Experimental study of corroded RC beams: dissipation and equivalent viscous damping ratio identification Materials And Structures 2022 10.1617/s11527-022-01906-y
• [Couture, Bésuelle] A true triaxial experimental study on porous Vosges sandstone: from strain localization precursors to failure using full-field measurements International Journal Of Rock Mechanics And Mining Sciences 2022 10.1016/j.ijrmms.2021.105031
• [Dumont, Gupta, Martoïa, et. al.] Elongational behaviour of electrostatically stabilised and concentrated CNF and CNC hydrogels: Experiments and modelling Carbohydrate Polymers 2022 10.1016/j.carbpol.2022.120168
• [Martoïa, Gupta, Dumont, et. al.] Rheology of concentrated and highly concentrated enzymatic cellulose nanofibril hydrogels during lubricated compression Carbohydrate Polymers 2022 10.1016/j.carbpol.2022.119911
• [Reu, Blaysat, Andò, et. al.] DIC Challenge 2.0: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses Focus on the Metrological Efficiency Indicator Strain 2022 10.1007/s11340-021-00806-6
• [Depriester, Rolland Du Roscoat, Orgéas, et. al.] Individual fibre separation in 3D fibrous materials imaged by X-ray tomography Journal Of Microscopy 2022 10.1111/jmi.13096
• [Blaise, Bles, Dib, et. al.] Modelling of cyclic visco-elasto-plastic one dimensional behaviour of polyamide-based woven strap Textile Research Journal 2022 10.1177/00405175221078533
• [Balbinot, Martoïa, Dumont, et. al.] In situ 3D observations of capillary-driven flows in parallel arrangements of rigid fibres using X-ray microtomography Composites Part A: Applied Science And Manufacturing 2022 10.1016/j.compositesa.2022.106941
• [Di Donna, Charrier, Dijkstra, et. al.] The contribution of swelling to self-sealing of claystone studied through x-ray tomography Physics And Chemistry Of The Earth, Parts A/B/C 2022 10.1016/j.pce.2022.103191
• [Caglar, Broggi, Ali, et. al.] Deep learning accelerated prediction of the permeability of fibrous microstructures Composites Part A: Applied Science And Manufacturing 2022 10.1016/j.compositesa.2022.106973
• [Birmpilis, Mohammadi, Villanova, et. al.] Fabric Investigation of Natural Sensitive Clay from 3D Nano- and Microtomography Data Journal Of Engineering Mechanics - Asce 2022 10.1061/(ASCE)EM.1943-7889.0002044
• [Couture, Papazoglou, Tengattini, et. al.] X-Ray Imaging of Immiscible Fluid Fingering Patterns in a Natural High Porosity Rock Frontiers In Physics 2022 10.3389/fphy.2022.839368
• [Liu, Wautier, Zhou, et. al.] Incremental shear strain chain: a mesoscale concept for slip lines in 2D granular materials Granular Matter 2022 10.1007/s10035-022-01258-y
• [Calonne, Burr, Philip, et. al.] Effective coefficient of diffusion and permeability of firn at Dome C and Lock In, Antarctica, and of various snow types - estimates over the 100-850 kg m⁻³ density range The Cryosphere 2022 10.5194/tc-16-967-2022
• [Eid, Socol, Naillon, et. al.] Viro-fluidics: Real-time analysis of virus production kinetics at the singlecell level Biophysical Reports 2022 10.1016/j.bpr.2022.100068
• [Savin, Baroth, Badina, et. al.] Damage due to start-stop cycles of turbine runners under high-cycle fatigue International Journal Of Fatigue 2021 10.1016/j.ijfatigue.2021.106458
• [Stamati, Roubin, Andò, et. al.] Fracturing process of micro-concrete under uniaxial and triaxial compression: Insights from in-situ X-ray mechanical tests Cement And Concrete Research 2021 10.1016/j.cemconres.2021.106578
• [Capdevielle, Grange, Dufour, et. al.] A shear warping kinematic enhancement for fiber beam elements with a damaging cross-section Finite Elements In Analysis And Design 2021 10.1016/j.finel.2021.103559
• [Montellà, Chauchat, Chareyre, et. al.] A two-fluid model for immersed granular avalanches with dilatancy effects Journal Of Fluid Mechanics 2021 10.1017/jfm.2021.666
• [Ortega Laborin, Roubin, Malecot, et. al.] General Consistency of Strong Discontinuity Kinematics in Embedded Finite Element Method (E-FEM) Formulations Materials 2021 10.3390/ma14195640
• [Moreira, Pont, Ausas, et. al.] Main trends on the simulation of the drying of refractory castables - Review Ceramics International 2021 10.1016/j.ceramint.2021.07.015
• [Bourrier, Dorren, Nicot, et. al.] Toward objective rockfall trajectory simulation using a stochastic impact model Geomorphology 2021 10.1016/j.geomorph.2009.03.017
• [Cheikh Sleiman, Tengattini, Briffaut, et. al.] Simultaneous x-ray and neutron 4D tomographic study of drying-driven hydro-mechanical behavior of cement-based materials at moderate temperatures Cement And Concrete Research 2021 10.1016/j.cemconres.2021.106503
• [Duplan, Forquin] Investigation of the multiple-fragmentation process and post-fragmentation behaviour of dense and nacre-like alumina ceramics by means of tandem impact experiments and tomographic analysis International Journal Of Impact Engineering 2021 10.1016/j.ijimpeng.2021.103891
• [Orgéas, Dumont, Martoïa, et. al.] On the role of fibre bonds on the elasticity of low-density papers: a micro-mechanical approach Cellulose 2021 10.1007/s10570-021-04098-w
• [Orgéas] Chain-mail fabric stiffens under confining pressure Nature 2021 10.1038/d41586-021-02116-2
• [Arminjon] Spectral energy density in an axisymmetric galaxy as predicted by an analytical model for the Maxwell field Advances In Astronomy 2021 10.1155/2021/5524600
• [Charlier, Viguié, Harthong, et. al.] Experimental investigation and process optimization of the ultrasonic welding applied to papers Materials Science And Engineering Technology / Materialwissenschaft Und Werkstofftechnik 2021 10.1002/mawe.202100031
• [Monot, Viguié, Charlier, et. al.] Ultrasonic welding of folding boxboards Bioresources 2021 10.15376/biores.16.3.5766-5779
• [Saramito, Dansereau, Weiss] Linking bulk modulus to an unilateral damage yield criterion: a thermodynamic modeling approach International Journal Of Damage Mechanics 2021 10.1177/1056789521991201
• [Baroth, Briffaut, Vu, et. al.] Prediction of perforation into concrete accounting for saturation ratio influence at high confinement International Journal Of Impact Engineering 2021 10.1016/j.ijimpeng.2021.103923
• [Wautier, Veylon, Miot, et. al.] Multiscale modelling of granular materials in boundary value problems accounting for mesoscale mechanisms Computers And Geotechnics 2021 10.1016/j.compgeo.2021.104143
• [Darve, Nicot, Wautier, et. al.] Slip lines versus shear bands: two competing localization modes Mechanics Research Communications 2021 10.1016/j.mechrescom.2020.103603
• [Moreira, Ausas, Dal Pont, et. al.] Towards a single-phase mixed formulation of refractory castables and structural concrete at high temperatures International Journal Of Heat And Mass Transfer 2021 10.1016/j.ijheatmasstransfer.2021.121064
• [Moreira, Dal Pont, Ausas, et. al.] Direct comparison of multi and single-phase models depicting the drying process of refractory castables Open Ceramics 2021 10.1016/j.oceram.2021.100111
• [Blasone, Saletti, Baroth, et. al.] Ultra-high performance fibre-reinforced concrete under impact of an AP projectile: Parameter identification and numerical modelling using the DFHcoh-KST coupled model International Journal Of Impact Engineering 2021 10.1016/j.ijimpeng.2021.103838
• [Georges, Saletti, Montagnat, et. al.] Influence of porosity on ice dynamic behavior as assessed by spalling tests Journal Of Dynamic Behavior Of Materials 2021 10.1007/s40870-021-00300-z
• [Abdul-Rahman, Saletti, Forquin] Experimental study of the static and dynamic behavior of pre-stressed concrete subjected to shear loading Engineering Structures 2021 10.1016/j.engstruct.2021.111865
• [Törnquist, Le Cann, Tudisco, et. al.] Dual modality neutron and x-ray tomography for enhanced image analysis of the bone-metal interface Physics In Medicine And Biology 2021 10.1088/1361-6560/ac02d4
• [Sun, Roubin, Shao, et. al.] FE modeling of concrete with strong discontinuities for 3D shear fractures and comparison with experimental results Engineering Fracture Mechanics 2021 10.1016/j.engfracmech.2021.107752
• [Sun, Roubin, Shao, et. al.] Strong discontinuity FE analysis for heterogeneous materials: The role of crack closure mechanism Computers & Structures 2021 10.1016/j.compstruc.2021.106556
• [Guillaume, Le Cann, Tengattini, et. al.] Neutron microtomography to investigate the bone-implant interface – comparison with histological analysis Physics In Medicine And Biology 2021 10.1088/1361-6560/abf603
• [Anselmucci, Andò, Viggiani, et. al.] The use of x-ray tomography to investigate soil deformation around growing roots Géotechnique Letters 2021 10.1680/jgele.20.00114
• [Teil, Regazzi, Harthong, et. al.] Manufacturing of starch-based materials using ultrasonic compression moulding (UCM): toward a structural application Heliyon 2021 10.1016/j.heliyon.2021.e06482
• [Sun, Du, Dias] An improved Hyperstatic Reaction Method for tunnels under seismic loading Tunnelling And Underground Space Technology 2021 10.1016/j.tust.2020.103687
• [Tran, Villard, Dias] Geosynthetic reinforced piled embankment modeling using discrete and continuum approaches Geotextiles And Geomembranes 2021 10.1016/j.geotexmem.2020.10.026
• [Jenck, Obaei, Emeriault, et. al.] Effect of Horizontal Multidirectional Cyclic Loading on Piles in Sand: A Numerical Analysis Journal Of Marine Science And Engineering 2021 10.3390/jmse9020235
• [Bourrier, Toe, Garcia, et. al.] Experimental investigations on complex block propagation for the assessment of propagation models quality Landslides 2021 10.1007/s10346-020-01469-5
• [Dansereau, Weiss, Saramito] A continuum viscous-elastic-brittle, finite element DG model for the fracture and drift of sea ice Challenges And Innovation In Geomechanics 2021 10.1007/978-3-030-64514-4_8
• [Benniou, Accary, Malecot, et. al.] Discrete element modeling of concrete under high stress level: influence of saturation ratio Computational Particle Mechanics 2021 10.1007/s40571-020-00318-5
• [Al Heib, Hassoun, Emeriault, et. al.] Predicting subsidence of cohesive and granular soil layers reinforced by geosynthetic Environmental Earth Sciences 2021 10.1007/s12665-020-09350-3
• [Stamati, Roubin, Andò, et. al.] Tensile damage mechanisms of concrete using X-ray in situ experiments and mesoscopic modelling Handbook Of Damage Mechanics : Nano To Macro Scale For Materials And Structures 2021
• [Damerji, Yadav, Sieffert, et. al.] Design of a Shake Table with Moderate Cost Experimental Techniques 2021 10.1007/s40799-021-00482-0
• [Giry, Stocchi, Zentner, et. al.] Methodology for updating magnitudes assigned to historical earthquakes: application to the La Tour-du-Pin 1889 earthquake Comptes Rendus. Géoscience 2021 10.5802/crgeos.82
• [Al Heib, Hassoun, Nghiem, et. al.] Modélisation physique à 1xg pour l’étude des conséquences de mouvements de terrain et des moyens de mitigation Revue Française De Géotechnique 2021 10.1051/geotech/2021003
• [Dumont, Flin, Malinka, et. al.] Experimental and model-based investigation of the links between snow bidirectional reflectance and snow microstructure The Cryosphere 2021 10.5194/tc-15-3921-2021
• [Crété, Opdyke, Moles, et. al.] Incorporating Local Building Practices in Response Roadmap For Research: A Collaborative Research Framework For Humanitarian Shelter And Settlements Assistance 2021
• [Granger, Flin, Ludwig, et. al.] Orientation selective grain sublimation–deposition in snow under temperature gradient metamorphism observed with diffraction contrast tomography The Cryosphere 2021 10.5194/tc-15-4381-2021
• [Arminjon] An analytical model for the Maxwell radiation field in an axially symmetric galaxy Open Physics 2021 10.1515/phys-2021-0008
• [Yadav, Damerji, Keco, et. al.] Effects of horizontal seismic band on seismic response in masonry structure: Application of DIC technique Progress In Disaster Science 2021 10.1016/j.pdisas.2021.100149
• [Niepceron, Charpin, Corbin, et. al.] Ageing and air leakage assessment of a nuclear reactor containment mock-up: VERCORS 2nd benchmark Nuclear Engineering And Design 2021 10.1016/j.nucengdes.2021.111136
• [Moreira, Dal Pont, Tengattini, et. al.] Experimental proof of moisture clog through neutron tomography in a porous medium under truly one‐directional drying Journal Of The American Ceramic Society 2021 10.1111/jace.18297
• [Andò, Marks, Roux] Single-projection reconstruction technique for positioning monodisperse spheres in 3D with a divergent x-ray beam Measurement Science And Technology 2021 10.1088/1361-6501/abfbfe
• [Ghafour, Balbinot, Audry, et. al.] Permeability of flax fibre mats: Numerical and theoretical prediction from 3D X-ray microtomography images Composites Part A: Applied Science And Manufacturing 2021 10.1016/j.compositesa.2021.106644
• [Horiguchi, Richefeu] Post-analysis simulation of the collapse of an open sabo dam of steel pipes subjected to boulder laden debris flow International Journal Of Sediment Research 2020 10.1016/j.ijsrc.2020.05.002
• [Montellà, Chareyre, Salager, et. al.] Benchmark cases for a multi-component Lattice–Boltzmann method in hydrostatic conditions Methodsx 2020 10.1016/j.mex.2020.101090
• [Bouhjiti, Baroth, Dufour, et. al.] Stochastic finite elements analysis of large concrete structures’ serviceability under thermo-hydro-mechanical loads – Case of nuclear containment buildings Nuclear Engineering And Design 2020 10.1016/j.nucengdes.2020.110800
• [Lukić, Saletti, Forquin] Validation of the photomechanical spalling test in the case of non‐linear dynamic response: Application to a granite rock Strain 2020 10.1111/str.12363
• [Tengattini, Dal Pont, Cheikh Sleiman, et. al.] Quantification of evolving moisture profiles in concrete samples subjected to temperature gradient by means of rapid neutron tomography: Influence of boundary conditions, hygro‐thermal loading history and spalling mitigation additives Strain 2020 10.1111/str.12371
• [Caulk, Scholtes, Krzaczek, et. al.] A pore-scale thermo–hydro-mechanical model for particulate systems Computer Methods In Applied Mechanics And Engineering 2020 10.1016/j.cma.2020.113292
• [Furet, Lambert, Villard, et. al.] Réponse sous impact de murs pare-blocs Revue Française De Géotechnique 2020 10.1051/geotech/2020017
• [Cochereau, Bailly, Orgéas, et. al.] Mechanics of human vocal folds layers during finite strains in tension, compression and shear Journal Of Biomechanics 2020 10.1016/j.jbiomech.2020.109956
• [Colyvas, Malecot, Sieffert, et. al.] Behavior of Reinforced Concrete Beams using Wire Rope as Internal Shear Reinforcement Engineering Technology & Applied Science Research 2020 10.48084/etasr.3496
• [Alhajj Chehade, Dias, Sadek, et. al.] Upper bound seismic limit analysis of geosynthetic-reinforced unsaturated soil walls Geotextiles And Geomembranes 2020 10.1016/j.geotexmem.2020.02.001
• [Chèvremont, Bodiguel, Chareyre] Lubricated contact model for numerical simulations of suspensions Powder Technology 2020 10.1016/j.powtec.2020.06.001
• [Stamati, Andò, Roubin, et. al.] spam: Software for Practical Analysis of Materials Journal Of Open Source Software 2020 10.21105/joss.02286
• [Tengattini, Lenoir, Andò, et. al.] NeXT-Grenoble, the Neutron and X-ray tomograph in Grenoble Nuclear Instruments And Methods In Physics Research Section A: Accelerators, Spectrometers, Detectors And Associated Equipment 2020 10.1016/j.nima.2020.163939
• [Arminjon] An explicit representation for the axisymmetric solutions of the free Maxwell equations Open Physics 2020 10.1515/phys-2020-0117
• [Aranguren, Vieux-Champagne, Duriez, et. al.] Experimental analysis of timber inclusions effect on paraseismic behavior of earth masonry walls Engineering Structures 2020 10.1016/j.engstruct.2020.110429
• [Avdellidou, Didonna, Schultz, et. al.] Very weak carbonaceous asteroid simulants I: Mechanical properties and response to hypervelocity impacts Icarus 2020 10.1016/j.icarus.2020.113648
• [Sun, Guo, Dias] Evaluation of the seismic site response in randomized velocity profiles using a statistical model with Monte Carlo simulations Computers And Geotechnics 2020 10.1016/j.compgeo.2020.103442
• [Caulk, Catalano, Chareyre] Accelerating Yade’s poromechanical coupling with matrix factorization reuse, parallel task management, and GPU computing Computer Physics Communications 2020 10.1016/j.cpc.2019.106991
• [Peinke, Hagenmuller, Andò, et. al.] Experimental Study of Cone Penetration in Snow Using X-Ray Tomography Frontiers In Earth Science 2020 10.3389/feart.2020.00063
• [Dauti, Tengattini, Pont, et. al.] Some Observations on Testing Conditions of High-Temperature Experiments on Concrete: An Insight from Neutron Tomography Transport In Porous Media 2020 10.1007/s11242-020-01392-2
• [Duriez, Vieux-Champagne, Trad, et. al.] A methodology for the mix design of earth bedding mortar Materials And Structures 2020 10.1617/s11527-020-1443-9

Sources: HAL - 18/10/22 20:51:32